Skip to main content

How to Make Your Own Growth Forms

Written by Ecovative | Posted on 02/01/18

We realized a lot of our GIY customers don’t have laser cutters, CNC machines, or thermoformers to make growth forms on their own. So! We are launching this guide to help you make your own forms using items found at home!

Form Making Tips & Tricks

  • Always sterilize your growth forms.
  • Use non-porous materials or use a non-porous liner on the inside of the growth form.
  • Make sure the growth forms are sealed tight to prevent moisture from escaping.
  • Poke air holes to provide oxygen.
  • Think about how you will remove your piece from the growth form. If you are making a growth form with design features on all sides, your growth form should separate into 2 or more parts.
  • If possible, angle the growth form’s sides, a very minimal 2 degrees, to allow parts to slide out easily.
  • Think about how many times you want to use the growth form. Some materials can be washed and reused multiple times. The more you plan to reuse it, the sturdier the material should be.
  • Condensation building up inside your growth form is a sign of healthy mycelium growth!

 

Suggested Growth Forms Making Techniques

Found Items

Found items are the easiest method to assemble a growth form.

  • Look around your house, go to a garage sale, go dumpster diving, find a kitchen supply store, or even take from your tupperware shelf at home.
  • The best found objects are non porous and allow you to poke air holes in them.

In the past our customers have used things like bowls, cups, lampshades, and takeout containers. Check out some examples below:

Using found items to make a vase Found items put together to grow a vase Vase grown from found items

 A mycelium planter grown using a tupperware as a growth form

 

 

Cardboard Growth Forms

Cardboard growth forms allows you to make complex shapes with just a craft knife and tape.

  • Construct your shape by cutting and folding the cardboard.
  • Cutting shapes to make cardboard growth forms
  • Use tape as necessary. Line the inside of your cardboard with plastic wrap, tape, wax, or any other waterproof liner. Bonus points if you have access to waxed cardboard (commonly found in take out boxes).
  • Taping the cardboard growth form
  • Corrugated cardboard sealed with tape is great for geometric shapes with straight edges like cubes, triangles, etc.
  • When constructing organic forms use corrugated cardboard. Round or organic shaped growth forms can cause bumps on your final grown piece from recesses in bent corrugated cardboard.

Using hot glue to hold together the tape and cardboard form

 Cardboard growth forms all taped up and ready to fill

Filling the cardboard form with mycelium + hemp material

Cardboard growth form growing, covered in plastic wrap to keep in moisture

 

 

Bag Growth Forms

Grow organic shapes with a garbage bag or plastic film.

  • Draw your pattern onto the bag.
  • Draw your pattern onto a plastic bag
  • Account for the extra space the pattern will require when it is 3 dimensional.
  • Cut the pattern out and tape the seams together/use an impulse sealer.
  • Add your mycelium material.
  • Holding up bag form filled with material
  • Straight Filling
  • Make sure you seal the bag to prevent too much moisture from escaping.
  • We missed sealing in one area and the mycelium dried out and didn’t grow

    We missed sealing in one area and the mycelium dried out and didn’t grow

  • Poke holes for airflow.
  • Poking holes for airflow
  • If your bag growth form cannot support itself standing up, think about hanging it. If needed you can add structure to the bag like taped on cardboard or thick wire or to the mycelium with wooden armatures on the interior.
  • Building a scaffolding to hold up the bag form
  • Wooden supports inside the mycelium material

 

Growth Form Techniques in Progress

Tape Growth Form

Tape growth forming is a great way to create growth forms that take the shape of an existing object.

  • Wrap your object with the sticky side facing up, not touching the mycelium material.
  • Wrap with a second layer of tape (sticky side to sticky side).
  • Stretchy tapes like duct tape will limit the amount of wrinkles that form on the inside of your growth form with organic shapes. 

Making tape handle form of Japanese knife

Taking tape handle form of Japanese knife

In-progress knife handle grown with mycelium material

Growing a tape form handle onto a new knife

Growing a tape form handle onto a new knife

 

Wood Growth Form

Wood growth forms are a sturdy option for making reusable forms.

Waterproof the interior to keep the mycelium from growing into the wood.

If you don’t waterproof the interior, you can grow mycelium directly into the unfinished wood. Make sure to sterilize the wood first by soaking it overnight in 3% hydrogen peroxide.

 

Advanced Growth Form Making

A lot of people don’t have access to these tools at home. Try finding a local makerspace or machine shop near you!

 

Thermoformed Growth Forms

You can create growth forms that are used to produce many grown parts using a thermoformer or vacuum former. CNC your positive shape out of a non heat sensitive material, like wood. Thermoform a sheet of plastic around the positive form. Take the growth formed plastic sheet off the CNC shape. Fill the plastic sheet with mycelium material.

 

3D Printed Growth Forms

3D Printing can help create precise multi part growth forms with complex shapes. Keep in mind, some 3D Printed plastics like PLA have the potential to be eaten into by the mycelium. You should seal those growth forms.

 

Get creative! Forms Forms Forms!!!

The possibilities are endless. Our fellow GIY maker Ben Coney is using sand covered with plaster gauze to create the growth forms for his mycelium project.

Written by Ecovative | Posted on 02/01/18